The information contained herein is subject to change without notice. © Copyright 2008, 2012 Hewlett-Packard Development Company, L.P. HP assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels. We would also recommend to review the B120i (Dynamic Smart Array Controller) user guide for more information.HP Smart Array Controllers for HP ProLiant Servers User Guide Abstract This document includes feature, installation, and configuration information about HP Smart Array Controllers and is for the person who installs, administers, and troubleshoots servers and storage systems. If an optional controller is installed, when the system recognizes the controller during POST, press F5.If an optional controller is not installed, press F10 during boot.Refer to M元10e Gen8 server user guide on the following link - ĪCU is now available as an embedded utility, starting with HP ProLiant Gen8 servers. B120i is not an Intelligent hardware as compared to a traditional Smart Array Controllers.į5 option is given only for traditional Smart Array Controller & will not work for B120i - Dynamic Smart Array controller. B120i works based on additional drivers & software RAID can be created on the connected drives. Many prefer to use the software RAID functions built into the OS as the driver is kernel specific and requires a new driver for any kernel update.ī120i is a Dynamic Smart Array controller & not a traditional Smart Array controller. You will need to download the driver for your OS (OS support is limited to Windows, VMware, Red Hat and SUSE) Many call this 'fake raid' as it is software RAID since the RAID function is controlled by the driver. I'm certain the Smart Array has been selected.Īnyone have any idea what/why this issue is happening?įrom within RBSU you need to change the SATA controller options and switch the controller mode from SATA AHCI to B120i Dynamic Smart Array Controller. The difference is it displays HP ACHI SATA Controller.

Note: When I tap F5 when prompted, the screen flashes and the entire screen's resolution changes (lower-rez) but displays almost the same info.

When i choose F5 during boot-up, the screen states 'F5 has been selected.' and '.system will boot into Smart Array Contoller' but never does.

Smart Array Contoller (B120i) is set to be used in boot options. HPE Blog, Austria, Germany & Switzerland.

Hp smart array controller launch setup